Here are a few tips to help ensure the best results and long life with your Iron.
1. The plus helps to prevent electric shocks. If the Iron does not turn on when the switch is turned to the on position, be sure that the red reset button on the plug is depressed. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The Iron is turned on and off by sliding the concealed switch inside the hankle. The red indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the Iron off when not in use.
3. The ceramic paddles may be cleaned of product build-up using rubbing alcohol and a clean cloth. Be sure that the Iron is turned off, unplugged, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the Iron away from water. Never submerge the Iron in water as it will damage the Iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tightened. Unplug the Iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage.
If you have any question, please feel free to contact with us. We provide a big discount to our customers.
ourdhgate@yeah.net |
Home
